Industry News
-
What are the main varieties of white copper plate?
In our daily life, we will use a lot of metal products. Many metal products are synthetic. The white copper sheet is a copper alloy with nickel as the main alloy and no element. Based on copper-nickel alloys, cupronickel rods with third elements such as zinc, manganese, aluminum, etc. are added, ...Read more -
How to Melt Aluminum Brass
The aluminum brass series is more complicated, and some of the complex aluminum brass contain the third and fourth alloying elements such as manganese, nickel, silicon, cobalt and arsenic. HAl66-6-3-2 and HAl61-4-3-1, which have more alloying elements, are alloys composed of six elements, and som...Read more -
Changes in properties of chromium zirconium copper after heat treatment
After solution aging treatment, fine black precipitates are densely distributed at the grain boundaries of chromium zirconium copper, and many small black precipitates are also distributed in the grain, with a size of about a few microns. As the temperature decreases, the curve approaches the cop...Read more -
Hardness of brass
Ordinary Brass It is an alloy of copper and zinc. When the zinc content is less than 39%, zinc can dissolve in copper to form single-phase a, called single-phase brass, which has good plasticity and is suitable for hot and cold press processing. When the zinc content is more than 39%, there is a ...Read more -
The use of copper in production and life
conductivity of copper One of the most important properties of lead-free copper is that it has excellent electrical conductivity, with a conductivity of 58m/(Ω.mm square). This property makes copper widely used in the electronics, electrical, telecommunications and electronics industries. This hi...Read more -
Application of Copper in Light Industry
Application of Copper in Paper Industry In the current information-changing society, paper consumption is huge. The paper looks simple on the surface, but the papermaking process is very complex, requiring many steps and the application of many machines, including coolers, evaporators, beaters, p...Read more -
Applications and uses of lead-free copper
Applications and uses of lead-free copper 1. It is suitable for all kinds of cold heading, bending and riveting parts, electronic and telecommunication connectors, connectors and other parts with ecological environmental protection and health and safety requirements. 2. It is suitable for automat...Read more -
Different grades of tin bronze
Tin bronze has been widely used in various industrial sectors for a long time. However, the grades of tin bronze are different, and their performance and uses are also different. QSn4-3: It has good elasticity, wear resistance and diamagnetism, and has good processing performance in hot and cold ...Read more -
How to identify the type of copper alloy
How to identify the type of copper alloy? White copper, brass, red copper (also known as “red copper”), and bronze (blue-gray or gray-yellow) are distinguished by color. Among them, white copper and brass are very easy to distinguish; red copper is pure copper (impurities <1%) and ...Read more -
Can aluminum bronze be replaced by tin bronze plate
Can aluminum bronze be replaced by tin bronze plate? As an elastic alloy, tin bronze plate refers to a copper-tin alloy containing Sn≤6.5%, usually still containing P, Zn and other alloy elements. If it also contains P, it is called phosphor-tin bronze, which has high elastic limit, elastic modul...Read more -
What are the casting methods for lead-free copper sleeves?
Sand casting is the most common method for copper gaskets used in sand casting production, which has the advantages of wide adaptability and relatively simple production preparation. However, the dimensional accuracy, surface quality, and internal quality of castings produced by this method are f...Read more -
Welding properties of various copper alloys
Welding properties of various copper alloys: 1. The thermal conductivity of red copper is high. The thermal conductivity of red copper at room temperature is about 8 times larger than that of carbon steel. It is difficult to locally heat the copper weldment to the melting temperature. Therefore, ...Read more
