nybjtp

News

  • Milling surface quality of brass strip hot rolling process

    Milling surface quality of brass strip hot rolling process

    The hot rolling process of brass strip is the first process of semi-continuous ingot heating, hot rolling and cold rolling, and it is also the key process of strip surface quality control. In the heating stage, the atmosphere in the furnace, the temperature, the heating time and the quality of co...
    Read more
  • Laying requirements for brass strip

    Laying requirements for brass strip

    Brass strip in order to meet the requirements of high frequency protection, at the same time, but also in order to balance the voltage of the power grid, reduce the voltage difference, reduce the resistance of the power grid loop, we need to secondary equipment special grounding copper bar laying...
    Read more
  • Application and chemical polishing treatment of brass sheet

    Application and chemical polishing treatment of brass sheet

    Brass can be processed into brass sheet, brass wire, etc., is applied to every corner of life. First, it can be used in the HNA industry. Because brass plate whether in cold or hot state, have very good processing performance. So it is widely used in the parts processing of some Marine equipment ...
    Read more
  • Brass sheet surface rust inhibitor treatment method

    Brass sheet surface rust inhibitor treatment method

    In order to make the surface of brass sheet more beautiful, cleaner, longer preservation time, usually carry on the surface rust inhibitor treatment, and there are many kinds of treatment, according to different states of different treatment: The first surface mechanical rust preventive treatment...
    Read more
  • Difficulties in welding copper strips

    Difficulties in welding copper strips

    Copper strip has good electrical and thermal conductivity, but there are still many difficult problems in the welding process. The thermal conductivity of red copper belt is much greater than that of steel. Welding heat is more likely to be lost, more likely to cause excessive internal stress, re...
    Read more
  • The stability of brass sheet

    The stability of brass sheet

    In different buildings, different brass sheet products can be used, such as copper oxide plate. When used, it will form a uniform brown appearance and be more regular. Moreover, copper plates can also be used in the renovation of various old buildings, or some buildings with special requirements....
    Read more
  • Processing technology and application of brass strip

    Processing technology and application of brass strip

    Information technology is the precursor of high technology. The main trend of computer development is fast and stable data transmission, bandwidth and low power consumption. In the computer needs a large number of brass strip alloy for spring, contactor, switch and other elastic parts. A large nu...
    Read more
  • Leaded brass tube processing requirements

    Leaded brass tube processing requirements

    First of all, leaded brass tube before processing can not have cracks, distortion, not round deformation, in the factory had made a defect mark, before processing must ensure the inner surface of clean, no water no oil. Secondly, the processing of the pipeline is processed in accordance with the ...
    Read more
  • Reverse extrusion technology and selection principle of brass sheet

    Reverse extrusion technology and selection principle of brass sheet

    With the development of economy and science and technology, the quality requirements of extruded products are higher and higher, and some special requirements are put forward in some aspects, which promote the rapid development of brass sheet reverse extrusion technology. A new type of reverse ex...
    Read more
  • Copper strip control surface quality measures

    Copper strip control surface quality measures

    Copper strip high purity, fine tissue, oxygen content is very low. It has good electrical conductivity, thermal conductivity, corrosion resistance and machining properties, and can be welded and brazed. Measures to control the surface quality of red copper strip: first of all, we should strengthe...
    Read more
  • Brass strip application and processing

    Brass strip application and processing

    Brass strip is a long conductor of rectangular or chamfered sections made of copper, used to carry current in circuits and connect electrical equipment. Because copper is better than aluminum in conducting electricity, brass strip has been widely used in electrical equipment, especially in power ...
    Read more
  • Control method of surface quality of copper busbar

    Control method of surface quality of copper busbar

    Surface quality control is the whole process of copper busbar production to product packaging control, is a fine management, careful operation of the system engineering, each process is the key to control product surface quality. The quality of billet surface is greatly affected by whether the co...
    Read more
123456 Next > >> Page 1 / 7